Gasmaster Gas Monitor – 2700 Series

$534.00$1,291.00

The 2700 series of Kanomax Gas Monitors can be configured with a wide range of single or multi-gas sensor heads. Each sensor head is simply plugged into the detector to begin monitoring. The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.

Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb. Unit comes with a self calibration zero-out feature. The monitor is compatible with a full range of gas sensors. The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.

VIEW DATASHEET

Clear


Share
Description

The 2700 series of Kanomax Gas Monitors can be configured with a wide range of single or multi-gas sensor heads. Each sensor head is simply plugged into the detector to begin monitoring. The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.

Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb. Unit comes with a self calibration zero-out feature. The monitor is compatible with a full range of gas sensors. The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.

 

Main Unit Specifications
Measurement Units PPM or mg/m3
Sensor Head Removable and Replaceable
Output 0 to 5 V, Alarm output
Data Logging 8188 data points
Power Supply Li-Ion Battery or AC Adapter
Dimensions (with sensor head) 7.0 x 4.75 x 2.0 inches (195 x 122 x 54 mm)
Weight (with sensor and battery) 1 lbs (460 g)
Standards CE-mark
Part 15 of FCC Rules
EN 50082-1: 1997
EN 50081-1: 1992
Warranty 1 year
What’s Included Meter, Li-ion battery pack, Operation manual, AC adapter, PC connection cable*, Data processing software*

(*PC connection cable and data processing software only available for Model 2750)

 

Gas Monitor Sensor Heads
Sensor Range (PPM) Accuracy of Calibration Min. Detection Limit (PPM) Resolution (PPM) Operational Temperature Range Operational RH Range
Ammonia 0-100 <±10% 0.2 0.1 32-104°F 10-90%
Ammonia (leak) 0-1000 <±15% 2 1 32-104°F 10-90%
Carbon Monoxide 0-25 <±0.5 ppm 0-5 ppm; 0.05 0.01 32-104°F 10-90%
<±10% 5-25 ppm
Carbon Monoxide 0-100 <±1 ppm 0-10 ppm; 0.2 0.1 32-104°F 10-90%
<±10% 10-100 ppm
Carbon Monoxide 0-1000 <±10 1 1 32-104°F 10-90%
Carbon Dioxide 0-2000 <±10 ppm +5% 10 1 32-104°F 10-90%
Carbon Dioxide 0-5000 <±20 ppm +5% 20 1 32-104°F 10-90%
Chlorine 0-10 <±10% 0.02 0.01 32-104°F 10-90%
Formaldehyde 0-10 <±0.05 ppm 0-0.5 ppm; 0.01 0.01 32-104°F 10-90%
<±10% 0.5-10 ppm
Hydrogen 0-5000 <±10 5 1 32-104°F 10-90%
Hydrogen Sulfide 0-10 <±0.05 ppm 0-0.5 ppm; 0.04 0.01 32-104°F 10-90%
<±10% 0.5-10 ppm
Hydrogen Sulfide 0-100 <±0.5 ppm 0-5 ppm; 0.04 0.01 32-104°F 10-90%
<±10% 5-100 ppm
Methane 0-10000 <±15% 10 1 32-104°F 10-90%
Nitrogen Dioxide 0-1 <±0.02 ppm 0-0.2 ppm; 0.005 0.001 32-104°F 10-90%
<±10% 0.2-1 ppm
Ozone 0-0.15 <±0.005 ppm 0.001 0.001 32-104°F 10-90%
Ozone 0-0.5 <±0.008 ppm 0-0.1 ppm; 0.001 0.001 32-104°F 10-90%
<±10% 0.1-0.5 ppm
Ozone 0-10 <±0.1 ppm 0-1 ppm; 0.02 0.01 32-104°F 10-90%
15% 1-10 ppm
Perchloroethylene 0-200 <±5 ppm 0-50 ppm; 1 1 32-104°F 10-90%
<±10% 50-200 ppm
Sulphur Dioxide 0-10 <±0.05 ppm 0-0.5 ppm; 0.04 0.01 32-104°F 10-90%
<±10% 0.5-10 ppm
Sulphur Dioxide 0-100 <±0.5 ppm 0-5 ppm; 0.4 0.1 32-104°F 10-90%
<±10% 5-100 ppm
VOC (GSS sensor) 0-25 <±10% 0.1 0.1 32-104°F 10-90%
VOC (GSS sensor) 0-500 <±10% 1 1 32-104°F 10-90%
VOC (GSS sensor) 0-20 <±10% 0.02 0.01 32-104°F 10-90%
VOC (GSS sensor) 0-1000 <±10% 0.2 0.1 32-104°F 10-90%
Temperature -20-100°C <± 0.3°C 0.01°C -40-248°F 0-105%
Humidity 0 to 100% <± 2% RH 1% RH -40-248°F 0-105%

 

Gas Monitor Laser Particle Sensor Head
Sensor Type Range (mg/m3) Accuracy of Calibration Min. Detection Limit (mg/m3) Resolution (mg/m3) Operational Temperature Range Operational RH Range
LPC 0.001-1.000 ±0.005 mg/m3 +15% 0.001 0.001 0-40°C 0-90%

Additional information

Model

2710, 2750

Features & Benefits

– Features on-board alarm, data logging, software interface, and an analog output

– The basic monitor will display minimum, maximum and average readings and is designed for short term indoor measurements

– Measures a wide range of common indoor air pollutants

– Interchangeable sensor heads capable of measuring more than 20 types of toxic gases, and one that can measure particles

– Accurate and reliable measurements

– Alarm and analog output available

– Can be configured with a wide range of single or multi-gas sensor heads.

– Each sensor head is simply plugged into the detector to begin monitoring.

– The detector does not require additional configuration allowing sensor heads to be swapped out easily in the field.

– Sensor heads come with a NIST TRACEABLE CALIBRATION certificate.

– Increased sensitivity at a higher resolution is attained due to measurements being collected in ppb.

– Unit comes with a self calibration zero-out feature.

– The monitor is compatible with a full range of gas sensors.

– The optional remote sensor head adapter kit allows the sensor head to be located up to 46 ft. away.

Applications

– IAQ Investigation

– Industrial Hygiene Quality Control

– Occupational Safety and Health Testing

– US GBC LEED certification

Reviews

There are no reviews yet.

Be the first to review “Gasmaster Gas Monitor – 2700 Series”

Privacy Preference Center