Traceable® Alarm Thermometer/Timer

$29.00
  • Stainless-steel probe and cable may be placed in an oven or incubator
  • Display shows time, current temperature, and alarm temp setting, °F/°C switchable
  • Heat-resistant cable may be placed in ovens and incubators making this unit ideal for those applications
  • Unique, adjustable display and large digits allow for viewing from 9 feet at any angle

VIEW INSTRUCTIONS

Probe Temperature Range 0 to 200°C (32 to 392°F)
Temperature Resolution
Temperature Accuracy ±2°C
# of Probes 1
Included Probe Stainless-Steel Probe
Probe Dimensions 8½-inch length, ¼” diameter;
Cable Length 42″ cable
Weight 4-1/4 ounces
LCD Digit Size 5/8 in
Dimensions 2-3/4″x3″x1/2″
Supplied With Battery, Stainless-steel probe, 42″ Metal cable, Traceable® Certificate

Available on backorder



Share
Description

Unique thermometer/timer with alarms is perfect for monitoring liquids, air/gas, or semisolids. Measure in °F or °C with a range of 32 to 392°F and 0 to 200°C. Resolution is 1° and accuracy is ±2°C. Triple display simultaneously shows time remaining to zero, probe temperature, and temperature alarm setting. Large, 1-1/2 x 2-inch LCD may be read from 9 feet away. Two distinctive alarms signal time and temperature.

ALARMS FOR TEMPERATURES AND TIME

Temperature alarm may be set in 1° increments. A five-minute alarm sounds continuously when temperature rises above alarm set point. Alarm continues for 5 seconds every minute until switched off or temperature falls below set point. Timer counts down from 24 hours and may be set in 1-minute increments. When zero is reached, a 1-minute alarm sounds, Time’s Up flashes, and timer begins counting up. For repetitive times, a memory recalls previous setting. Intuitive controls are front-mounted. Viewing angle is adjustable. Fold-back display panel and magnets on back permit vertical mounting.

METAL CABLE FOR OVENS

Detachable, curved stainless-steel probe has a 1/4-inch diameter and 8-1/2-inch length. High-temperature resistant silicon-coated cable (42 inches) may be placed in an oven or incubator. Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2017 (1750.01) calibration laboratory accredited by A2LA.  It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. High-impact, chemical-resistant ABS plastic base is 2-3/4 x 3 x 1/2 inches, LCD: 2-3/4 x 2-1/2 x 1/2 inches, weight: 4-1/4 ounces. Replacement battery Cat. No. 1105.

Additional information

Weight 0.26 lbs
Reviews

There are no reviews yet.

Be the first to review “Traceable® Alarm Thermometer/Timer”

Privacy Preference Center