Traceable One-Shot® Assortment (6/pk)

$30.00
  • Calibration within disposable container eliminates contamination
  • Certified Reference Material
  • 100% compatible with all conductivity meters
  • Accuracy: certificate stated uncertainty, or ±0.25 microsiemen or ±0.25%
  • Assortment (one each of above One-Shot™, except 4271, 4580, 4581)

VIEW 4172 MSDS

VIEW 4065 SDS FRENCH

 

Available on backorder



Share
Description

Single-use conductivity standards calibrate all conductivity meters and probes for maximum accuracy. One-Shots™ eliminate concern about external container contamination. Calibration is made in the standard’s vial. Container fits all probes. Extra-large opening (1-3/4-inches diameter) and extra-large, 3-1/2-inches depth allow probe calibration to take place in the standard’s polyethylene container. One-Shot™ Traceable® standards accommodate all conductivity probes and are ideal for lab or field conditions.

USE STANDARDS WITH ALL METERS

Traceable® Conductivity Standards are the most accurate available. Accuracy at 25°C is (±0.25 microsiemens for 1, 5, 10 microsiemen solution or ±0.25% for other solutions) or the uncertainty shown on the certificate, whichever is greater. Each container is labeled for calibrating conductivity (microsiemens/micromhos), resistivity (ohms), and dissolved solids (parts per million).

METHODS SUPPORTED

This certified reference material meets test requirements for Federal, State, and local agencies, CAP, ASTM, NCCLS, CLSI, ACS, CLIA, AOAC, EPA, APHA, AWWA, WEF, USGS, USP, and ISO. Traceable® Certified Reference Material complies with and is essential for use in these official methods: AOAC 973.40, EPA 120.1, Standard Method 2510 (APHA, AWWA, WEF), ISO 7888, DIN 38404, ASTM D1125, USGS I-1780, USP 645, and for A2LA/NVLAP accreditations/ISO 9000 certifications. Material may be used to calibrate all conductivity meters and to determine all conductivity cell constants.

DOUBLE A2LA ACCREDITATION ISO/IEC 17025:2017 (1750.01) AND ISO GUIDE 34:2009 (1750.02)

To assure accuracy an individually serial-numbered Traceable® Certificate is supplied to indicate traceability to standards provided by NIST (National Institute of Standards and Technology) and/or a National Standards Laboratory. Double A2LA accredited certification provides the highest achievable level of quality assurance, documentation, and accuracy. Certified Reference Materials are produced in our A2LA accredited ISO/IEC 17025:2017 (1750.01) calibration laboratory and from an A2LA accredited ISO Guide 34:2009 (1750.02) reference material producer. Additional certifications include ISO 31 (certificate content) and ISO 35 (statistical analysis), plus ISO 9001 (certified quality manufacturer). Each container is supplied with step-by-step calibration instructions, individual temperature compensation chart, traceability information, and Traceable® Certificate. Supplied as a pack of six. Each One-Shot™ contains 100 milliliters.

Traceable® Conductivity Standards, Certified Reference Material Accredited ISO Guide 34 (1750.02), ISO Guide 35, ISO Guide 31, ISO/IEC 17025:2017 (1750.01)
Cat. No. 16oz. Bottle Cat. No. Individually Tested
16 oz.bottle
Cat No.
100 ml One-Shot™ (6-pack)
Microsiemens/Micromhos Megohms TDS/PPM
4274 4574 1 1 0.66
4270 4570 4271 5 0.2 3.3
4065 4565 4175 10 0.1 6.6
4066 4566 4176 100 0.01 66
4067 4567 4177 1000 0.001 666
4173 4573 4174 1413 0.00071 933
4068 4568 4178 10000 0.0001 6666
4069 4569 4179 100000 0.00001 66666
4161 4561 4580 150000 0.000006 100000
4162 4562 4581 200000 0.000005 133333
4172 Assortment (one each of above One-Shot™, except 4271, 4580, 4581)

 

Additional information

Weight 1.26 lbs
Reviews

There are no reviews yet.

Be the first to review “Traceable One-Shot® Assortment (6/pk)”

Privacy Preference Center