Traceable® Printing Thermometer

$454.00
  • Built-in printer provides permanent record with time-and-date-stamp
  • Prints time and date for Max only, Min only, average only, and in circularly mode T1, T2 and differential, printing programs in intervals of 3 secs to 23h 59m 59s
  • MIN,MAX or average temperature readings may be displayed or cleared at any time with the touch of a key
  • Alarm feature may be set in 0.1 increments and will sound when temperature rises above or falls below set point
  • Dual probe inputs allow displaying temperature of probe 1, probe 2, or difference (delta) of probe 1 and 2 (accepts Type J, K, T, or E probe), °F/°C switchable

VIEW INSTRUCTIONS

VIEW VIDEO MIN/MAX MEMORY

Meter Temperature Range –200 to 1333°C (–328 to 2431°F)
Meter Temperature Resolution 0.1°
Meter Temperature Accuracy ±1°C
# of Probes 2
Included Probe Type-K beaded probe
Included Probe Range –40 to 250°C continuous or 300°C short-term
Probe Dimensions 0.06″ diameter,
Cable Length 4′ cable
Weight 10 ounces
LCD Digit Size 5/8 in
Dimensions 3″x1-1/2″x7-1/2″
Supplied With Two 4-foot Type-K beaded probes, Traceable® Certificate, batteries, two thermal paper rolls (good for approximately 1400 printings per roll), ABS carrying cas

Available on backorder



Share
Description

PRINTING THERMOMETER PROVIDES PERMANENT RECORD, PRINTS TIME AND DATE

Provides permanent record of temperature and time of day/date/month. The perfect dependable and reliable unit to monitor temperature in lab, plant, and field. Fulfills federal requirements for CLIA specification 493.1252.

HARD COPY RESULTS

Printer provides hard copy for today’s stringent quality-control documentation. Memory feature permits monitoring conditions overnight, on weekends, or for any time period. Alarm output feature may be used to trigger an external device.

WIDE RANGE

Displays temperatures from –328 to 2431°F and –200 to 1333 °C with a resolution of 0.1° and an accuracy of ±1°C from –50 to 982 °C, otherwise ±1.5 °C. Supplied with two fast-response, Type-K beaded sensors with cable length of 4 feet. Display is updated every second.

TRACEABLE® CERTIFICATE

Multi-point calibration on an individually-numbered Traceable® Certificate which assures accuracy from our ISO/IEC 17025:2017 (1750.01) calibration laboratory accredited by A2LA.  It indicates traceability of measurements to the SI units through NIST or other recognized national measurement institutes (NMI) that are signatories to the CIPM Mutual Recognition Agreement. Supplied with two fast-response, Type-K beaded sensor, Traceable® Certificate, six AAA batteries, two thermal paper rolls (good for approximately 1400 printings per roll), and ABS carrying case. Supplied with paper, carrying case, and six AAA batteries. Accessory adaptor for continuous AC operation is available. Tough ABS plastic case is chemical- and shock-resistant. Unit is 7-1/2 x 3 x 1-1/2 inches. Weight is 10 ounces. Replacement battery Cat. No. 1105.

Additional information

Weight 0.62 lbs
Reviews

There are no reviews yet.

Be the first to review “Traceable® Printing Thermometer”

Privacy Preference Center